Nipple Pump Cylinders
********FOLLOWING OUR CLOSURE FOR OUR VACATION, WE HOPE TO GET ALL OUTSANDING ORDERS OUT BY 27TH SEPTEMBER., BUT THERE MAY BE SOME MINOR DELAYS AS WE CATCH UP********
WE SHIP ACROSS THE GLOBE! All cylinders are hand finished to order and usually take 2-3 working days to make. Please make sure you follow the advice on sizing on the MEASURING page on the menu above. All sizes are to the nearest 1/4 inch but metric sizes are exact. WE ARE ALWAYS HAPPY TO HELP IF YOU NEED SOME ADVICE!
£44.99 – £58.99
Our nipple pump cylinders (sold in pairs) will give you beautiful enlarged and sensitive nipples. They are suitable for both men and women and will add to your sexual pleasure.
Our nipple enlargement cylinders are expertly hand crafted out of acrylic, making them a very comfortable fit as well as being highly durable. You can pump both the nipple itself or the entire nipple including the areola (the pigmented area behind the actual nipple). Your size will spend on what you want to pump. For all but the longest tits, we recommend the 2″ long cylinders which are less likely to fall off or be knocked off whilst you are pumping! If you wear nipple jewllery, please consider these when sizing your cylinders.
If you cannot find the size you are looking for please contact us, or visit our special request section for more information on ordering different sizes of nipple pump cylinders and more!
Pumps are sold separately.
All our cylinders come with push/fit connectors. You can disconnect from the pump and the cylinder will maintain the vacuum. Cylinders come with a cylinder connector, but if you are using your own pump you will need some hose and a pump connector. You can also use our Nipple Connectors. These are not necessary for nipple cylinders, as they can be shut off from the pump separately, but they are fun. They are NOT suited well for the 1/2 ” (bullet) nipple cylinders, a they tend to pull them off.
PLEASE NOTE: The 1/2 inch nipple cylinder is the only cylinder in our range no made of cast acrylic. It is made of extruded acrylic, has a thin wall of 3mm. This is due to the limitations at this tube size.